405.282.2113 or 1.800.375.4471
Newby-Vance Mobility is Oklahoma's leading source for the EZ-Lock Wheelchair Docking System. This automatic lock down system is the industry standard for wheelchair securement.
For those who rely on their wheelchair as seating in their vehicle, the EZ Lock system is the absolute best solution for travel safety and security.
The EZ Lock Wheelchair Docking System easily secures a wheelchair to the vehicle floor; saving you both time and effort.
Even better, the automatic docking base allows the user to lock the wheelchair into place without the assistance of others. No more struggling to cinch the straps down; no more hassle. We do our best to make it easy for you to meet your mobility needs; whether your driving or just enjoying the ride.
EZ Lock is perfectly suited for both wheelchair seated passengers and drivers. In fact, no other adaptive device provides for more freedom of mobility, or enhances the user's overall level of independence, than the EZ Lock Wheelchair Docking System does.
You can also have confidence that the EZ Lock is a tried and true system, with more than two decades of proven performance.
EZ-Locks focus, coupled with the knowledge and professionalism of Newby-Vance Mobility, ensures that you get the finest docking system available.
How It Works...
Using the EZ Lock Docking System simply requires that you guide your wheelchair into the docking base until the interfacing bracket attached to the wheelchair locks securely into place.
In the photo to the right, the demonstration unit to illustrates the principle of the docking system.
Here, the docking pin attached to the demo “wheelchair” is aligned and ready to engage the docking base.
The “V” shaped structure at the opening of the docking base helps to guide the wheelchair into position.
Locks the Wheelchair Securely into the Docking Base...
Once in position, just pull forward a few inches and the wheelchair engages the docking base. The pin attached to the interface bracket is captured by a pair of steel 1/4” locking levers and is securely held in place by the docking base.
Interface brackets are available for many different wheelchairs, including both power and manual models. For a listing of compatible wheelchairs: Click Here.
Once the wheelchair is securely locked into the docking base, the dependable ECU-3 electronics monitor your docking status the duration of your trip.
Electronics You Can Count On...
EZ-Lock's electronics have a reputation for dependability. The touch pad control has an array of clearly visible indicators to monitor the docking status of the wheelchair, an audible alarm, and large back-lit buttons for release and system deactivation.
The green light indicates the wheelchair is fully engaged in the docking base. The yellow light indicates the wheelchair is NOT fully engaged with the docking base. The user must exit the docking base and re-attempt until fully engaged.
The flashing red light indicates the system has been deactivated for occasions where the docking base is not occupied by a wheelchair. The “deactivated” mode is only used when the docking system is NOT occupied by a wheelchair. The audible alarm and release are disabled in this mode. To release the wheelchair from the docking system; turn off the vehicle’s ignition and press the release switch.
A Proven Record of Success...
EZ-Lock refuses to cut corners when your safety is at stake. EZ-Lock uses only the highest grade materials; from the sturdy all-steel construction of the docking base...to the refined, nearly "bullet-proof" control electronics.
Convenience is one thing, but confidence is quite another, and you can be confident that the EZ Lock has what it takes to protect you. The EZ Lock Wheelchair Docking System has demonstrated it's effectiveness countless times... in the test laboratory and on the street.